The 8-Port In-Skin Switching Hub (Obsolete); Power Fail Transfer; Cables - NEC SOPHO 2000 IPS User Manual

4.10The 8-port In-skin Switching Hub (obsolete)

Note: this card in not RoHS compliant and will be phased out.
12NC
960051102498

4.11Power Fail Transfer

These cards provide power fail transfer options from internal analogue lines to external
analogue trunk lines during power fail situations. Typical cards combined with these
options are 8LC, 4LC and 8COT cards.
12NC
960051150119
960051151493

4.12Cables

The following cables are available for bus, inter-PIM, power and battery connections.
12NC
UNIVERGE NEAX 2000 IPS General Description
Issue 5
Description
SPN-8ETIA ETHER SW 10
Description
PZ-8PFTB
PZ-4PFTA
Description
X ? - 8-port In-skin Switching Hub
till
- Layer 2 switch functions
11 - Eight 10BASE-T/100BASE-TX ports, Auto-negotiation
- Auto MDI/MDI-X
- Max. 2,048 MAC address table
- PoE: 802.3af or NEC protocol (signal-pair feeding) for
bakup DtermIP power
Number of DtermIP connections per hub: Max. 7 (IPS),
Max. 4 (DM/DMR)
Requires PZ-PW122 (IPS) or PN-PW03 (DM/DMR) for
PoE
- Max. 1 hub per PIM
- Occupies 2 physical card slots for mounting the Hub
(Occupies 1 physical card slots when the hub mounts
in Slot 00 (IPS PIM) or Slot 02/05 (DM PIM))
X - - 8-line Power Failure Transfer Card:
• Mounted in PFT slot of PIM.
• One card per PIM.
- X X 4-line Power Fail Transfer Circuit
CHAPTER 3 TERMINALS
Function
Function
Function
Page 109