Mp Program Download - NEC SOPHO 2000 IPS User Manual

o A modem at the maintenance center and one at each remote site. (When the
internal
o modem of the Main Processor (MP) is used, no modem at each remote site is
required)
o A cable for connection between the MP and the on-site modem. (When the
internal
o modem of the MP is used, the above cable is not required)
2. The internal modem of the MP is compatible with the following specifications:
o ITU-T V.22 1200 bps
o ITU-T V.22 bis 2400bps
o ITU-T V.32, 4800/9600 bps
o ITU-T V.34, 19.2 k/33.6 kbps
o Bell 212A 1200 bps
3. Any one of the following connections are also required for access to the modem:
o A dedicated line
o Attendant controlledtransfer
o Direct Inward System Access(DISA)
o Direct Inward Termination
4. The following operations can be executed from the Remote Maintenance location:
o Retrieval of fault data
o Retrieval of Peg Count information
o Deletion or addition of system data (line, trunk, etc.) using a preprogrammed
security password
o Data assignment by device number (stations, trunks, and Attendant Console)
o Copying of station data from one station to other stations (when adding sequential
stations in groups)
o Release / Reconnection of backup batteries
o Display of station line status

6.5.4.6 MP Program Download

The SOPHO 2000 IPS provides Online MP Program Download via IP network using the
CP24 (IPS/PSDM/ IPS Remote PIM) and CP31 (IPS DML/ IPS DMR). This feature
allows an MP upgrade program to be downloaded to the SOPHO 2000 IPS MP card with
the PBX on-line and during the download process all features and functions are available.
The MP Program Download feature is available to a stand alone system or a Remote
system in a Remote PIM network.
The IPS downloads the MP upgrade program from FTP server using MATWorX.
MATWorX and the FTP server can be installed and running on the same PC. A single
FTP server or multiple FTP servers can be used. Immediate or scheduled changeover to
the upgrade program is available. It is also possible to change back to the previous
program that was in use before the changeover (changeback).
UNIVERGE NEAX 2000 IPS General Description
Issue 5
CHAPTER 3 TERMINALS
Page 208