NEC SOPHO 2000 IPS User Manual page 140

Answer can be set by the individual station user, an Attendant Console, or by a Multiline
Terminal with a secondary appearance of the station's extension.
Call Forwarding - Destination
This feature allows a station (A) user to set Call Forwarding - All Calls from another
station (B) within the system, to the user's station (A).
Call Forwarding - Logout (DtermIP)
This feature allows a call terminated to an IP Station in Logout Status to be forwarded to
a designated Station, Outside Number, Attendant Console or Digital Announcement
Trunk (DAT). This feature is also
applicable to the IP Stations that the LAN Cable is pulled out of or the power is off.
Call Forwarding - Override
This feature allows the call forward destination station to call the station which set call
forward. The call forward setting will be ignored.
CLI to ISDN on Call Forwarding - outside (R12.3)
When an incoming trunk call is forwarded by Call Forwarding-Outside, CLI of the
external calling party or of the forwarding station can be presented to ISDN by system
data programming.
Multiple Call Forwarding - All Calls
When a forwarded call is rerouted to a station that has also set a Call Forward, the call can
be forwarded to another station. A call can be forwarded up to a maximum of five times,
as specified in system programming.
Multiple Call Forwarding - Busy Line
This feature permits a call to a busy station to be forwarded multiple times to a designated
idle station.
Multiple Call Forwarding - No Answer
This feature permits a call to an unanswered station, the ability to be forwarded multiple
times to a designated station that does not have Call Forwarding - No Answer set or to the
Attendant Console.
Split Call Forwarding - All Calls
This feature allows all internal and external calls to a busy extension to be rerouted to
different destinations individually, regardless of the busy or idle status of the extension.
According to the type of incoming call (Station, C. O. Line, Tie Line, or a call terminated
from internal office or via CCIS); Call Forwarding or Split Call Forwarding can be
selected.
Split Call Forwarding - Busy Line
This feature allows internal and external calls to a busy extension to be rerouted to
separate destinations. Destinations may be an internal station, Attendant Console, or voice
mail. And according to the type of a caller (Station/C.O. Line/Tie Line) or a call
terminated from internal office or via CCIS, Call Forwarding or Split Call Forwarding can
be selected.
UNIVERGE NEAX 2000 IPS General Description
Issue 5
CHAPTER 3 TERMINALS
Page 140