NEC SOPHO 2000 IPS User Manual page 147

Prior to R12.2, when a Dterm user enters wrong character or number during directory
search or directory data entry, the user cannot modify the input characters or numbers
(need back from the start). In R12.2 software, the Dterm user can delete the input
characters or numbers from the last input and re-enter the correct characters or numbers.
Dial Conversion
The system can be assigned to use rotary Dial Pulse (DP) or Dual Tone Multi-frequency
(DTMF) trunks and stations. This feature provides for the repeating of digits dialed by the
station user onto the C.O. trunks.
Direct Data Entry
This feature allows a maid or other hotel personnel to enter numeric data to the Property
Management System (PM S), using the guest room station for entry through dial
operation. The same numerical data can be output to a Hotel/Motel Printer by system data
programming.
Direct Digital Interface
This service feature provides the capability to connect trunks from the SOPHO 2000 IPS
directly to T1 carrier links using either a private or public network.
Direct Inward Dialing (DID)
This feature provides for incoming calls from the exchange network (except FX or
WATS) to reach any station within the system without attendant assistance.
DID Call Routing in case of no CLI (R11)
This feature allows a malicious call without CLI to be handled by an operator, a
predetermined answering position or announcement
In R11 software, when an ISDN DID call with no CLI (and no reason of absence of CLI)
is received, the DID call can be routed to one of the below options per tenant basis:
- A station based on the received DID number
- LED color on the Dterm line key and ring tone pattern of the Dterm can be different
between incoming call with CLI and without CLI, by system data programming
- A predetermined station
- Desk Console
- Digital Announcement Trunk (DAT)
Required Hardware:
- SPN-4BRTA-F (AP)
- SPN-30PRTA-D (AP)
DID Call Waiting
This feature allows an incoming call on a DID trunk or a tie line to automatically be
Camped-On to the destination station if the destination station is busy.
DID Digit Conversion
This feature allows the SOPHO 2000 IPS to convert the digits received from the serving
C.O. to valid station numbers when the C.O. numbering plan differs from the desired
station numbering plan.
DID Name Display
UNIVERGE NEAX 2000 IPS General Description
Issue 5
CHAPTER 3 TERMINALS
Page 147