Siemens SINUMERIK 802D sl Programming And Operating Manual page 91

Menu tree
Figure 7-5
Operating sequence
In the PROGRAM MANAGER operating area, select the program to be edited.
Press the <Open> softkey. The selected program will open.
Softkeys
Use this softkey to edit a file.
Use this softkey to execute the selected file.
Use this softkey to select a text segment up to the current cursor position (alternatively:
<CTRL+B>)
Use this softkey to copy a selected block to the clipboard (alternatively: <CTRL+C>)
Use this softkey to paste a text from the clipboard at the current cursor position (alternatively:
<CTRL+V>)
Surface grinding
Programming and Operating Manual, 11/2012, 6FC5398-5CP10-3BA0
"Program" menu tree
Part programming
7.3 Editing part programs or text files
91