Siemens SINUMERIK 802D sl Programming And Operating Manual page 120

System
8.3 SYSTEM - "Machine data" softkeys
Figure 8-11
To display the parameters, position the cursor on the appropriate unit and press the
"Parameter display" softkey. For a description of the parameters, please refer to the
documentation of SINAMICS drives.
Figure 8-12
Switch to the respective drive objects.
In the note line, the selected value is displayed in hexadecimal and binary values.
Use these functions to search in the parameter list for the term you are looking for.
120
Drive machine data
Parameter list
Programming and Operating Manual, 11/2012, 6FC5398-5CP10-3BA0
Surface grinding