Siemens SINUMERIK 802D sl Programming And Operating Manual page 141

Modem
If the data transfer is performed on the RS232 interface via modem, start with the following
initialization option:
Figure 8-36
The following initializations are possible via toggle fields:
● Baud rate
● Parity:
Using the "Modem settings" softkey you can make the following additional settings for a
connection that does not yet exist:
Figure 8-37
Surface grinding
Programming and Operating Manual, 11/2012, 6FC5398-5CP10-3BA0
Initialize the modem
9600 / 19200 / 38400 / 57600 / 115200.
"without" for 10 bit
"odd" for 11 bit
Modem settings
8.5 SYSTEM - "PLC" softkeys
System
141