System - "Commissioning Wizard" Softkeys - Siemens SINUMERIK 802D sl Programming And Operating Manual

System

8.7 SYSTEM - "Commissioning wizard" softkeys

8.7 SYSTEM - "Commissioning wizard" softkeys
Note
The function " Commissioning wizard" is displayed if the machine manufacturer has
configured a commissioning dialog.
Procedure:
See the SINUMERIK 802D sl operating instructions for turning, milling, grinding, nibbling,
Chapter "Create commissioning dialogs" or on the toolbox, the example shown under
..\Special\ Commissioning wizard.
If an example has been saved on the CF card of the control, then the "Commissioning
wizard" function is active in the <SYSTEM> operating area.
Figure 8-46
Press "Commissioning wizard".
Figure 8-47
152
Main screen system with active "Commissioning wizard" softkey
Example of a commissioning dialog under "Commissioning wizard"
Programming and Operating Manual, 11/2012, 6FC5398-5CP10-3BA0
Surface grinding