Siemens SINUMERIK 802D sl Programming And Operating Manual page 320

Data Backup
12.2 Creating / reading in / reading out a start-up archive
Figure 12-3
By pressing the <Select> key, the respective files can be individually selected/deselected in
the start-up archive.
Writing the start-up archive to a customer CompactFlash card/USB FlashDrive
Requirement: The CompactFlash Card/USB FlashDrive is inserted, and the start-up archive
has been copied to the clipboard.
Operating sequence:
or
Press the "Customer CF card" or "USB drive" softkey. In the directory, select the saving
location (directory).
Use the "Insert" softkey to start writing of the start-up archive.
In the dialog that follows, confirm the name that is specified or enter a new name. Close the
dialog box by pressing "OK".
320
Contents of the start-up archive
Programming and Operating Manual, 11/2012, 6FC5398-5CP10-3BA0
Surface grinding