Dressing With Profile Roller - Cycle430 - Siemens SINUMERIK 802D sl Programming And Operating Manual

9.14

Dressing with profile roller - CYCLE430

Programming
CYCLE430 (Y_AB, F_TVOR, F_VOR, N_AUS, N_ABR, GWPS, N_AWST)
Parameter
Table 9- 10
Parameter
Y_AB
F_TVOR
F_VOR
N_AUS
N_ABR
GWPS
N_AWST
Function
This cycle is used for dressing wheels using a profile roller.
Following dressing (each stroke), the dressed amount is taken into account in the wear
parameters of the current tool offset.
Dressing is performed in accordance with workpiece counter GC_WKS.
Sequence
If a profiling allowance is specified, this is processed first. This value can also be used to
search for a dresser if no sensor system is installed.
When processing the profiling allowance, no dresser wear compensation is currently applied.
The profiling allowance is taken into account in the base dimension of the dresser when
selecting the valid coordinate system. This does away with the requirement for a
programmable work offset for grinding operations. The coasting revolutions are the number
of revolutions taken for the roller to come to a stop against the wheel.
Surface grinding
Programming and Operating Manual, 11/2012, 6FC5398-5CP10-3BA0
Parameters of CYCLE430
Data type
REAL
REAL
REAL
REAL
INT
REAL
INT
9.14 Dressing with profile roller - CYCLE430
Meaning
Dressing amount in Y (incr.)
Insertion stroke in mm/rev
Dressing feedrate in mm/rev
Coasting revolutions
Number of dressing strokes
GWPS
Number of workpieces between two dressing
operations
Cycles
189