Establish The Ethernet Network Connection To The Control (Only With Sinumerik 802D Sl Pro) - Siemens SINUMERIK 802D sl Programming And Operating Manual

Network operation

11.8 Establish the Ethernet network connection to the control (only with SINUMERIK 802D sl pro)

11.8 Establish the Ethernet network connection to the control (only with
SINUMERIK 802D sl pro)
Prerequisite
The control system is connected to the PC or the local network via the X5 interface.
Entering network parameters
Switch to the the <SYSTEM> operating area.
Press the "Service display" "Service control system" softkeys.
Select the "Service network" softkey to display the network configuration window.
Figure 11-10 "Network configuration" main screen
Note
See also User management (Page 303) , Connecting / disconnecting network drives
(Page 313) , Establishing a peer-to-peer Ethernet connection to the control (Page 308)
310
Programming and Operating Manual, 11/2012, 6FC5398-5CP10-3BA0
Surface grinding