Siemens SINUMERIK 802D sl Programming And Operating Manual page 34

Setup
4.2 Create new tool
Operating sequences (new tool)
This function opens an input screen in which the tool number, tool type, and grinding wheel
shape are to be entered or selected.
Figure 4-3
Confirm your input using <OK>.
Figure 4-4
A data record loaded with zero will be included in the tool list. This data block consists of 9
cutting edges (D fields). The first 6 cutting edges have a cutting edge type and are used as
cutting edge geometry points.
The tool is assigned to a grinding spindle by an entry in the "S No" field. For values ≤0, an
externally controlled grinding spindle is used, for values >0, the grinding spindles of the
control system are known.
34
New tool
New tool inserted
Programming and Operating Manual, 11/2012, 6FC5398-5CP10-3BA0
Surface grinding