Siemens SINUMERIK 802D sl Programming And Operating Manual page 357

● Input via matrix
To select characters, proceed as follows:
● Select a row (the row will be color-highlighted)
● Select a column (the character will briefly be color-highlighted and then transferred to the
● Press the <input> key to transfer the character into the edit field.
Surface grinding
Programming and Operating Manual, 11/2012, 6FC5398-5CP10-3BA0
If you only have access to a control keyboard, then you can use a matrix input method as
an alternative to the keyboard assignment shown above. All you will need for this is the
numeric keypad.
Figure A-16 Korean editor with selection matrix
"Character" field).
Appendix
A.3 Miscellaneous
357