Siemens SINUMERIK 802D sl Programming And Operating Manual page 57

Figure 5-3
Parameter
Table 5- 1
Parameter
MCS
X
Y
Z
+ X
+ Y
- Z
Position
mm
Repos.
offset
G function
Spindle S
r.p.m.
Feed F
mm/min
Tool
Surface grinding
Programming and Operating Manual, 11/2012, 6FC5398-5CP10-3BA0
JOG mode start screen
Description of the parameters in the JOG start screen
Explanation
Displays the axes existing in the machine coordinate system (MCS) or in the workpiece
coordinate system (WCS)
If you traverse an axis in the positive (+) or negative () direction, a plus or minus sign
will appear in the relevant field.
If the axis is already in the required position, no sign is displayed.
These fields display the current position of the axes in the MCS or WCS.
If the axes are traversed in the "Program interrupted" condition in the
distance traversed by each axis is displayed referred to the interruption point.
Displays important G functions
Displays the actual value and the setpoint of the spindle speed.
Displays the path feedrate actual value and setpoint.
Displays the currently active tool with the current edge number
5.2 JOG mode - "Position" operating area
Manual mode
Jog
mode, the
57