Siemens SINUMERIK 802D sl Programming And Operating Manual page 318

Data Backup
12.1 Data transfer via RS232 interface
Further softkeys
Load files via the RS232 interface.
The following function is provided at this level:
Transmission protocol
This log contains all transmitted files including status information:
● For files to be output
● For files to be input
Table 12- 1
OK
ERR EOF
Time Out
User Abort
Error Com
NC / PLC Error
Error Data
Error File Name
318
: name of file
error log
: name of file and path
error log
Transmission messages
Transmission completed successfully
End-of-text character received, but archive file incomplete
The time monitoring is reporting an interruption of the data transfer
Data transfer aborted by the <Stop> softkey
Error at the COM 1 port
Error message from the NC
Data error
1. Files read in with / without header
or
2. Files transmitted without file names in the punched-tape format
The file name does not correspond to the name convention of the
NC.
Programming and Operating Manual, 11/2012, 6FC5398-5CP10-3BA0
Surface grinding