Siemens SINUMERIK 802D sl Programming And Operating Manual page 345

Table A- 5
Tx Dy
Tx Dy
Tx Dy
Tx Dy
Tx Dy
Tx Dy
Tx Dy
Tx Dy
Tx Dy
Tx Dy
Tx Dy
Tx Dy
Tx Dy
Tx Dy
Tx Dy
Tx Dy
Tx Dy
Tx Dy
Tx Dy
Tx Dy
Tx Dy
Tx Dy
Tx Dy
Tx Dy
Tx Dy
Tx Dy
Tx Dy
Tx Dy
Tx Dy
Tx Dy
Tx Dy
Tx Dy
Tx Dy
Tx Dy
Tx Dy
Surface grinding
Programming and Operating Manual, 11/2012, 6FC5398-5CP10-3BA0
7. to 9th cutting edge for dressers
DP1 INT Tool type=403
DP2 INT Cutting edge position (1...9)
DP3 REAL Position
DP4 REAL Position
DP5 REAL Position
DP6 REAL R - Tool nose radius
DP7 REAL Diameter
DP8 REAL Width
DP9 REAL Maximum peripheral speed
DP10 REAL Maximum speed
DP11 REAL Probing data block
DP12 REAL dD - Change in diameter (dressing amount X)
DP13 REAL dL - Change in distance (dressing amount Z)
DP14 REAL (Length 3)
DP15 REAL dR - Change in tool nose radius (radius wear)
DP16 REAL Roller circumference speed
DP17 REAL Maximum length 1 wear
DP18 REAL Maximum length 2 wear
DP19 REAL Maximum length 3 wear
DP20 REAL Roller direction of rotation optional
DP21 REAL Additional compens. in X, diameter, basic dimension
DP22 REAL Additional compens. in Z, length in Z, basic dimension
DP23 REAL (reserved, length 3)
DP24 REAL Z oscillating path
DP25 REAL Infeed amount per stroke
DPC1 REAL Reciprocation speed
DPC2 REAL Dressing amount
DPC3 REAL Approaching distance
DPC4 REAL X start
DPC5 REAL Z start
DPC6 REAL Dresser type (0 – X/Z, >0 rear, rotating,...)
DPC7 REAL Profile depth
DPC8 REAL Safety speed
DPC9 REAL X oscillating path
DPC10 REAL Reserved
A.2 Parameter tables of the tool data
Appendix
345