Working On The Basis Of A Network Connection; User Management - Siemens SINUMERIK 802D sl Programming And Operating Manual

11.2

Working on the basis of a network connection

The remote access (access to the control system from a PC or from a network) to the control
system is disabled by default.
After a local user logs on at the PC, the RCS tool provides the following functions:
● Commissioning functions
● Data transfer (transfer of part programs)
● Remote control for the control system
To grant access to a part of the file system, first share the relevant directories with other
users.
Note
If you share directories with other users, the authorized network nodes are granted access to
the shared files in the control system. Depending on the sharing option, the user can modify
or delete files.
11.3

User management

For the Ethernet connection, you must first log on a user to the control system.
In the operating area, press <SYSTEM> > "Service display" > "Service control system".
Select the "Service network" > "Authorization" softkey to display the user account input
screen.
Surface grinding
Programming and Operating Manual, 11/2012, 6FC5398-5CP10-3BA0
11.2 Working on the basis of a network connection
Network operation
303