Manual mode
5.3 MDA mode (manual input) "Position" operating area
Select the appropriate softkey for the traversing block.
"Technological data"
Figure 5-8
Enter the appropriate technological data (e.g. feedrate: 1000).
Click "Insert transfer" to add a new part program block. The new part program block will be
added in front of the block selected with the cursor.
Click "Change transfer" to change the selected part program block.
Use "<<Back" to return to the "Teach In" start screen.
"Rapid feed"
Figure 5-9
64
Technological data
Rapid traverse
Programming and Operating Manual, 11/2012, 6FC5398-5CP10-3BA0
Surface grinding