Siemens SINUMERIK 802D sl Programming And Operating Manual page 112

System
8.1 "System" operating area
Operating sequence
The full CNC keyboard is used to change to the <SHIFT> and <SYSTEM> operating areas
and the start screen is displayed.
Figure 8-2
Softkeys
The start screen vertical softkeys are described below.
"Set password"
Three password levels are distinguished in the control system, which provide different
access rights:
● System password
● Manufacturer password
● User password
It is possible to change certain data corresponding to the access levels. If you do not know
the password, access will be denied.
Note
Also see SINUMERIK 802D sl "Lists".
112
Main screen, <SYSTEM> operating area
Programming and Operating Manual, 11/2012, 6FC5398-5CP10-3BA0
Surface grinding