Siemens SINUMERIK 802D sl Programming And Operating Manual page 328

PLC diagnostics
13.3 Operating options
The values of the operands can be monitored and changed during program execution using
the "PLC status display" window.
Figure 13-3
Use the "Status list" softkey to display and modify PLC signals.
Figure 13-4
Using the "Window 1 ..." and "Window 2 ..." softkeys you can display any logical and
graphical information of a program block. The program block is one of the components of the
PLC user program.
The program block can be selected in the "Program list" using the "Open" softkey. The name
of the program block will be displayed on the softkey (for "..." e.g. "Window 1 SBR16").
328
PLC status display
Status list
Programming and Operating Manual, 11/2012, 6FC5398-5CP10-3BA0
Surface grinding