Screen Layout - Siemens SINUMERIK 802D sl Programming And Operating Manual

PLC diagnostics

13.2 Screen layout

13.2 Screen layout
The screen layout with its division into the main areas corresponds to the layout already
described in section "Software Interface".
Any deviations and supplements pertaining to the PLC diagnostics are shown in the
following screen.
Figure 13-1
Table 13- 1
Screen item
①
②
③
④
⑤
⑥
⑦
324
Screen layout
Key to screen layout
Display Meaning
Application area
Supported PLC program language
Name of the active program block
Representation: Symbolic name (absolute name)
Program status
RUN Program is running
STOP Program stopped
Status of the application area
Sym Symbolic representation
abs Absolute representation
Display of the active keys
Focus
Performs the tasks of the cursor
Tip line
contains notes for searching
Programming and Operating Manual, 11/2012, 6FC5398-5CP10-3BA0
Surface grinding