Mda Mode (Manual Input) "Position" Operating Area - Siemens SINUMERIK 802D sl Programming And Operating Manual

Manual mode

5.3 MDA mode (manual input) "Position" operating area

5.3 MDA mode (manual input) "Position" operating area
Functionality
In the MDA mode, you can create or execute a part program.
The Manual mode is subject to the same safety interlocks as the fully automatic mode.
Furthermore, the same prerequisites are required as in the fully automatic mode.
Operating sequences
Use the machine control panel to select "MDA" mode.
Figure 5-5
Enter one or several blocks using the keyboard.
By pressing <NC START> machining is started. During machining, editing of the blocks is no
longer possible.
After machining, the contents are preserved so that the machining can be repeated by
pressing <NC START> once more.
60
CAUTION
MDA mode start screen
Programming and Operating Manual, 11/2012, 6FC5398-5CP10-3BA0
Surface grinding