Step 5: Hardware Configuration Of The S7-400 Station; Step 6: Configuring A Network - Siemens SIMATIC 6ES7673-2CC40-0YA0 Hardware Installation And Operating Manual

Getting Started: Communication between a CPU 416-2 PCI and an S7-400
7.7

Step 5: Hardware Configuration of the S7-400 Station

1. Select the components listed below and assemble them as shown in the figure
below.
- Rack
- Power supply
- CPU 416-2
- CP 443-1
2. Fill in the properties of the Ethernet interface (create a MAC address and new
subnet) and click OK.
3. Click "Save and Compile" to close the dialog.
7.8

Step 6: Configuring a Network

Open NetPro by clicking the Configure Network button.
Result: the NetPro - [START_SLOT] window is displayed.
96
Hardware Installation and Operating Manual, Edition 02/2006, A5E00273194-02
Windows Automation Center, WinAC Slot Version 4.0