Mpls Lsp Commands - Alcatel-Lucent 7210 SAS M User Manual

MPLS/RSVP Command Reference

MPLS LSP Commands

config
Page 104
tion Guide
— router
— [no] mpls
— [no] lsp lsp-name [bypass-only | mpls-tp src-tunnel-num]
— [no] adaptive
— [no] adspec
— bgp-transport-tunnel
— [no] cspf [use-te-metric]
— [no] exclude group-name [group-name...(up to 5 max)]
— fast-reroute frr-method
— no fast-reroute
— bandwidth rate-in-mbps
— no bandwidth
— hop-limit number
— no hop-limit
— [no] node-protect
— from ip-address
— hop-limit number
— no hop-limit
— [no] include group-name [group-name...(up to 5 max)]
— [no] ldp-over-rsvp [include | exclude]
— metric metric
— [no] primary path-name
— [no] adaptive
— bandwidth rate-in-mpbs
— no bandwidth
— [no] exclude
— hop-limit number
— no hop-limit
— [no] include
— [no] record
— [no] record-label
— [no] shutdown
— retry-limit number
— no retry-limit
— retry-timer seconds
— no retry-timer
— rsvp-resv-style [se | ff]
— [no] secondary path-name
— [no] adaptive
— bandwidth rate-in-mbps
— no bandwidth
— [no] exclude
— hop-limit number
— no hop-limit
— [no] include
— [no] path-preference
— [no] record
— [no] record-label
— [no] shutdown
7210 SAS M, T, X, R6, Mxp MPLS Configura-
include | exclude
group-name [group-name...(up to 5 max)]
group-name [group-name...(up to 5 max)]
group-name [group-name...(up to 5 max)]
group-name [group-name...(up to 5 max)]