Alcatel-Lucent 7210 SAS M User Manual page 195

Subscription
Port Speed
Unreserved BW
Reserved BW
Total BW
Hello Interval
Refresh Time
Hello Timeouts
Neighbors
Sent
Recd
Total Packets
Bad Packets
Paths
Path Errors
Path Tears
Resvs
7210 SAS M, T, X, R6, Mxp MPLS Configuration Guide
Label
Specifies the percentage of the link bandwidth that RSVP can use for
reservation. When the value is zero (0), no new sessions are permitted
on this interface.
Specifies the speed for the interface.
Specifies the amount of unreserved bandwidth.
Specifies the amount of bandwidth in megabits per second (Mbps)
reserved by the RSVP session on this interface. A value of zero (0)
indicates that no bandwidth is reserved.
Specifies the amount of bandwidth in megabits per second (Mbps)
available to be reserved for the RSVP protocol on this interface.
Specifies the length of time, in seconds, between the hello packets that
the router sends on the interface. This value must be the same for all
routers attached to a common network. When the value is zero (0), the
sending of hello messages is disabled.
Specifies the interval between the successive Path and Resv refresh
messages. RSVP declares the session down after it misses ((keep-mul-
tiplier + 0.5) * 1.5 * refresh-time)) consecutive refresh messages.
The total number of hello messages that timed out on this RSVP inter-
face.
The IP address of the RSVP neighbor.
The total number of error free RSVP packets that have been transmit-
ted on the RSVP interface.
The total number of error free RSVP packets received on the RSVP
interface.
The total number of RSVP packets, including errors, received on the
RSVP interface.
The total number of RSVP packets with errors transmitted on the
RSVP interface.
The total number of RSVP PATH messages received on the RSVP
interface.
The total number of RSVP PATH ERROR messages transmitted on the
RSVP interface.
The total number of RSVP PATH TEAR messages received on the
RSVP interface.
The total number of RSVP RESV messages received on the RSVP
interface.
Description (Continued)
MPLS and RSVP
Page 195