Alcatel-Lucent 7210 SAS M User Manual page 179

202
-----------------------------------------------------------------
In-use labels in entire range
=================================================================
*A:SRU4>config>router>mpls#
label-range
Syntax label-range
Context show>router>mpls
Description
This command displays the MPLS label range.
Output MPLS Label Range Output — The following table describes the MPLS label range output fields.
Label Type
Start Label
End Label
Aging
Total Available
Sample Output
*A:Dut-A# show router mpls label-range
==============================================================================
Label Ranges
==============================================================================
Label Type
------------------------------------------------------------------------------
static-lsp
static-svc
dynamic
==============================================================================
*A:Dut-A#
7210 SAS M, T, X, R6, Mxp MPLS Configuration Guide
static-lsp
Label
Displays the information about static-lsp, static-svc, and dynamic
label types.
The label value assigned at the ingress router.
The label value assigned for the egress router.
The number of labels released from a service which are transitioning
back to the label pool. Labels are aged 15 seconds.
The number of label values available.
Start Label
32
2048
32768
STATIC
: 5057
Description
End Label Aging
1023 -
18431 -
131071 0
MPLS and RSVP
Total Available
992
16384
102400
Page 179