Alcatel-Lucent 7210 SAS M User Manual page 178

Show Commands
Interface
-------------------------------------------------------------------------------
system
Admin Groups
Srlg Groups
ip-10.10.2.3
Admin Groups
Srlg Groups
ip-10.10.5.3
Admin Groups
Srlg Groups
ip-10.10.11.3
Admin Groups
Srlg Groups
ip-10.10.12.3
Admin Groups
Srlg Groups
-------------------------------------------------------------------------------
Interfaces : 5
===============================================================================
*A:7210SAS#
label
Syntax label start-label [end-label | in-use | label-owner]
Context show>router>mpls
Description Displays MPLS labels exchanged.
Parameters start-label — The label value assigned at the ingress router.
end-label — The label value assigned for the egress router.
in-use — The number of in-use labels displayed.
Output MPLS Label Output Fields — The following table describes MPLS label output fields.
Label
Label Type
Label Owner
In-use labels in
entire range
Sample Output
*A:SRU4>config>router>mpls#
=================================================================
MPLS Label 202
=================================================================
Label
-----------------------------------------------------------------
Page 178
tion Guide
Label
Displays the value of the label being displayed.
Specifies whether the label value is statically or dynamically assigned.
The label owner.
The total number of labels being used by RSVP.
Label Type
Port-id
system
None
None
1/1/15
None
None
1/1/1
None
None
1/1/3
None
None
lag-1
None
None
Description
show router mpls label 202
Label Owner
7210 SAS M, T, X, R6, Mxp MPLS Configura-
Adm Opr TE-metric
Up Up None
Up Up None
Up Up None
Up Up None
Up Up None