Alcatel-Lucent 7210 SAS M User Manual page 194

Show RSVP Commands
Show RSVP Commands
interface
Syntax interface [ip-int-name | ip-address] statistics [detail]
Context show>router>rsvp
Description
This command shows RSVP interfaces.
ip-int-name — The name of the network IP interface. An interface name cannot be in the form of an
ip-address — The system or network interface IP address.
statistics — Displays IP address and the number of packets sent and received on an interface-basis.
detail — Displays detailed information.
Output RSVP Interface Output — The following table describes RSVP interface output fields.
Interface
Total Sessions
Active Sessions
Total BW (Mbps)
Resv BW (Mbps)
Adm
Opr
Port ID
Active Resvs
Page 194
tion Guide
IP address. If the string contains special characters (#, $, spaces, etc.), the entire string must be
enclosed within double quotes.
Label
The name of the IP interface.
The total number of RSVP sessions on this interface. This count
includes sessions that are active as well as sessions that have been sig-
naled but a response has not yet been received.
The total number of active RSVP sessions on this interface.
The amount of bandwidth in megabits per second (Mbps) available to
be reserved for the RSVP protocol on the interface.
The amount of bandwidth in mega-bits per seconds (Mbps) reserved
on this interface. A value of zero (0) indicates that no bandwidth is
reserved.
Down — The RSVP interface is administratively disabled.
Up — The RSVP interface is administratively enabled.
Down — The RSVP interface is operationally down.
Up — The RSVP interface is operationally up.
Specifies the physical port bound to the interface.
The total number of active RSVP sessions that have reserved band-
width.
Description
7210 SAS M, T, X, R6, Mxp MPLS Configura-