Alcatel-Lucent 7210 SAS M User Manual page 144

MPLS Commands
shutdown
Syntax [no] shutdown
Context config>router>mpls>lsp
Description This command disables the existing LSP including the primary and any standby secondary paths.
To shutdown only the primary enter the config router mpls lsp lsp-name primary path-name
shutdown command.
To shutdown a specific standby secondary enter the config router mpls lsp lsp-name secondary
path-name shutdown command. The existing configuration of the LSP is preserved.
Use the no form of this command to restart the LSP. LSPs are created in a shutdown state. Use this
command to administratively bring up the LSP.
Default shutdown
Page 144
Guide
7210 SAS M, T, X, R6, Mxp MPLS Configuration