Alcatel-Lucent 7210 SAS M User Manual page 285

Peer Parameters Commands
peer-parameters
Syntax peer-parameters
Context config>router>ldp
Description This command enables the context to configure peer specific parameters.
peer
Syntax [no] peer ip-address
Context config>router>ldp>peer-parameters
Description
This command configures parameters for an LDP peer.
Default none
Parameters ip-addr — The IP address of the LDP peer in dotted decimal notation.
auth-keychain
Syntax auth-keychain name
Context config>router>ldp>peer-parameters>peer
Description
This command configures TCP authentication keychain to use for the session.
Parameters name — Specifies the name of the keychain to use for the specified TCP session or sessions. This
authentication-key
Syntax authentication-key [authentication-key | hash-key] [hash | hash2]
no authentication-key
Context config>router>ldp>peer-parameters>peer
Description This command specifies the authentication key to be used between LDP peers before establishing
sessions. Authentication uses the MD-5 message-based digest. Peer address has to be the TCP session
transport address.
The no form of this command disables authentication.
7210 SAS M, T, X, R6, Mxp MPLS Configuration Guide
keychain allows the rollover of authentication keys during the lifetime of a session up to 32
characters in length. Peer address has to be the TCP session transport address.
LDP Configuration Commands
Page 285