Alcatel-Lucent 7210 SAS M User Manual page 192

Show Commands
status
Syntax status
Context show>router>mpls
Description This command displays MPLS operation information.
Output MPLS Status Output — The following table describes MPLS status output fields.
Admin Status
Oper Status
LSP Counts
FR Object
Resignal Timer
Hold Timer
*A:7210SAS# show router mpls status
===============================================================================
MPLS Status
===============================================================================
Admin Status
Oper Down Reason
FR Object
Hold Timer
Srlg Frr
Dynamic Bypass
Least Fill Min Thd.: 5 percent
Short. TTL Prop Lo*: Enabled
Page 192
tion Guide
Label
Down — MPLS is administratively disabled.
Up — MPLS is administratively enabled.
Down — MPLS is operationally down.
Up — MPLS is operationally up.
Static LSPs — Displays the count of static LSPs that originate,
transit, and terminate on or through the router.
Dynamic LSPs — Displays the count of dynamic LSPs that origi-
nate, transit, and terminate on or through the router.
Detour LSPs — Displays the count of detour LSPs that originate,
transit, and terminate on or through the router.
Enabled — Specifies that Fast reroute object is signaled for the
LSP.
Disabled — Specifies that Fast reroute object is not signaled for
the LSP.
Enabled — Specifies that the resignal timer is enabled for the LSP.
Disabled — Specifies that the resignal timer is disabled for the
LSP.
Displays the amount of time that the ingress node holds before
programming its data plane and declaring the LSP up to the service
module.
: Up
: n/a
: Enabled
: 1 seconds
: Disabled
: Enabled
Description
Oper Status
Resignal Timer
Next Resignal
Srlg Frr Strict
User Srlg Database : Disabled
LeastFill ReoptiThd: 10 percent
Short. TTL Prop Tr*: Enabled
7210 SAS M, T, X, R6, Mxp MPLS Configura-
: Up
: Disabled
: N/A
: Disabled