Alcatel-Lucent 7210 SAS M User Manual page 180

Show Commands
lsp
Syntax lsp lsp-name [status {up|down}] [from ip-address | to ip-address] [detail]
lsp {transit | terminate} [status {up | down}] [from ip-address | to ip-address | lsp-name
lsp count
lsp lsp-name activepath
lsp lsp-name path [path-name] [status {up |down}] [detail]
lsp [lsp-name] path [path-name] mbb
Context show>router>mpls
Description This command displays LSP details.
Parameters
lsp lsp-name — The name of the LSP used in the path.
status up — Displays an LSP that is operationally up.
status down — Displays an LSP that is operationally down.
from ip-address — Displays the IP address of the ingress router for the LSP.
to ip-address — Displays the IP address of the egress router for the LSP.
transit — Displays the number of static LSPs that transit through the router.
terminate — Displays the number of static LSPs that terminate at the router.
lsp count — Displays the total number of LSPs.
activepath — Displays the present path being used to forward traffic.
mbb — Displays make-before-break (MBB) information.
detail — Displays detailed information.
Output MPLS LSP Output — The following table describes MPLS LSP output fields.
LSP Name
To
Adm State
Oper State
Oper State
LSPs
From
Page 180
tion Guide
name] [detail]
Label
The name of the LSP used in the path.
The system IP address of the egress router for the LSP.
Down — The path is administratively disabled.
Up — The path is administratively enabled.
Down — The path is operationally down.
Up — The path is operationally up.
Down — The path is operationally down.
Up — The path is operationally up.
The total number of LSPs configured.
The IP address of the ingress router for the LSP.
Description
7210 SAS M, T, X, R6, Mxp MPLS Configura-