shutdown
Syntax
[no] shutdown
Context
config>router>mpls>static-lsp
Description
This command is used to administratively disable the static LSP.
The no form of this command administratively enables the static LSP.
Default
shutdown
to
Syntax
to ip-address
Context
config>router>mpls>static-lsp
Description
This command specifies the system IP address of the egress router for the static LSP. When creating
an LSP this command is required. For LSPs that are used as transport tunnels for services, the to IP
address must be the system IP address.
Parameters
ip-address — The system IP address of the egress router.
Default
none
7210 SAS M, T, X, R6, Mxp MPLS Configuration Guide
MPLS and RSVP
Page 161