Alcatel-Lucent 7210 SAS M User Manual page 199

TE6->
TE7->
No Neighbors.
===============================================================================
neighbor
Syntax neighbor [ip-address] [detail]
Context show>router>rsvp
Description
This command shows neighbor information.
Parameters
ip-address — Displays RSVP information about the specified IP address.
detail — Displays detailed information.
session
Syntax session session-type [from ip-address | to ip-address| lsp-name name] [status {up |
down}] [detail]
Context show>router>rsvp
Description
This command shows RSVP session information.
Parameters
session session-type — Specifies the session type.
from ip-address — Specifies the IP address of the originating router.
to ip-address — Specifies the IP address of the egress router.
lsp-name name — Specifies the name of the LSP used in the path.
status up — Specifies to display a session that is operationally up.
status down — Specifies to display a session that is operationally down.
detail — Displays detailed information.
Output RSVP Session Output — The following table describers RSVP session output fields.
From
To
Tunnel ID
7210 SAS M, T, X, R6, Mxp MPLS Configuration Guide
Resv. Bw : 0
Resv. Bw : 0
Values
originate, transit, terminate, detour, detour-transit, detour-terminate, bypass-tunnel,
manual-bypass
Label
The IP address of the originating router.
The IP address of the egress router.
The IP address of the tunnel's ingress node supporting this RSVP ses-
sion.
Unresv. Bw : 0
Unresv. Bw : 0
Description
MPLS and RSVP
Page 199