Configuring An Mpls Lsp - Alcatel-Lucent 7950 SR User Configuration Manual

Configuring an MPLS LSP

Configure an LSP path for MPLS. When configuring an LSP, you must specify the IP address
of the egress router in the to statement. Specify the primary path to be used. Secondary paths
can be explicitly configured or signaled upon the failure of the primary path. All other
statements are optional.
lsp config
The following displays an MPLS LSP configuration:
A:ALA-1>config>router>mplp# info
----------------------------------------------
...
----------------------------------------------
A:ALA-1>config>router>mpls#
7950 SR OS MPLS Configuration Guide
lsp "lsp-to-eastcoast"
to 192.168.200.41
rsvp-resv-style ff
cspf
include "red"
exclude "green"
adspec
fast-reroute one-to-one
exit
primary "to-NYC"
hop-limit 10
exit
secondary "secondary-path"
bandwidth 50000
exit
no shutdown
exit
no shutdown
MPLS and RSVP
Page 125