Alcatel-Lucent 7210 SAS M User Manual page 190

Show Commands
4659
4660
-------------------------------------------------------------------------------
No. of Groups: 30
===============================================================================
*A:SRU4>config>router>mpls#
*A:SRU4>config>router>mpls# show router mpls srlg-group "1432"
===============================================================================
MPLS Srlg Groups
===============================================================================
Group Name
-------------------------------------------------------------------------------
1432
-------------------------------------------------------------------------------
No. of Groups: 1
===============================================================================
*A:SRU4>config>router>mpls#
static-lsp
Syntax static-lsp [lsp-name]
static-lsp {transit | terminate}
static-lsp count
Context show>router>mpls
Description
This command displays MPLS static LSP information.
Output MPLS Static LSP Output — The following table describes MPLS static LSP output fields.
Lsp Name
To
Next Hop
In I/F
Out Label
Out I/F
Adm
Opr
LSPs
Page 190
tion Guide
Label
The name of the LSP used in the path.
The system IP address of the egress router for the LSP.
The system IP address of the next hop in the LSP path.
The ingress interface.
The egress interface.
The egress interface.
Down — The path is administratively disabled.
Up — The path is administratively enabled.
Down — The path is operationally down.
Up — The path is operationally up.
The total number of static LSPs.
4659 src-1.9
4660 src-1.10
Group Value Interfaces
1432 srl-1
Description
7210 SAS M, T, X, R6, Mxp MPLS Configura-