Alcatel-Lucent 7210 SAS M User Manual page 305

session
Syntax session [ip-addr[:label-space]] [detail | statistics [packet-type]] [session-type]
Context show>router>ldp
Description This command displays configuration information about LDP sessions.
Parameters
ip-address — Specify the IP address of the LDP peer.
label-space — Specifies the label space identifier that the router is advertising on the interface.
detail — Displays detailed information.
statistics packet-type — Specify the packet type.
session-type — Specifies to display the session type.
Output LDP Session Output — The following table describes LDP session output fields.
Sample Output
*A:SRU4>config>router>ldp#
==============================================================================
LDP Sessions
==============================================================================
Peer LDP Id
------------------------------------------------------------------------------
1.1.1.1:0
10.8.100.15:0
10.20.1.20:0
7210 SAS M, T, X, R6, Mxp MPLS Configuration Guide
Values
0 — 65535
Values hello, keepalive, init, label, notification, address
Values
link, targeted, both
Label
Peer LDP ID
Adj Type
State
Mesg Sent
Mesg Rcvd
Up Time
Adj Type
Link
Both
Both
The IP address of the LDP peer.
The adjacency type between the LDP peer and LDP session is targeted.
Link — Specifies that this adjacency is a result of a link hello.
Targeted — Specifies that this adjacency is a result of a targeted
hello.
Established — The adjacency is established.
Trying — The adjacency is not yet established.
The number of messages sent.
The number of messages received.
The amount of time the adjacency has been enabled.
show router ldp session
State Msg Sent
Nonexistent 2
Nonexistent 14653
Established 105187
Description
Msg Recv Up Time
1 0d 00:00:04
21054 0d 12:48:25
84837 0d 12:48:27
LDP
Page 305