Alcatel-Lucent 7210 SAS M User Manual page 312

Show Commands
Debug Commands
The following output shows debug LDP configurations discussed in this section.
A:ALA-12# debug router ldp peer 10.10.10.104
A:ALA-12>debug>router>ldp# show debug ldp
debug
exit
A:ALA-12>debug>router>ldp#
ldp
Syntax [no] ldp
Context debug>router
Description Use this command to configure LDP debugging.
interface
Syntax [no] interface interface-name
Context debug>router>ldp
Description
Use this command for debugging an LDP interface.
Parameters
interface-name — The name of an existing interface.
peer
Syntax [no] peer ip-address
Context debug>router>ldp
Description
Use this command for debugging an LDP peer.
Page 312
Guide
router "Base"
ldp peer 10.10.10.104
event
bindings
messages
exit
packet
hello
init
keepalive
label
exit
exit
exit
7210 SAS M, T, X, R6, Mxp MPLS Configuration
ldp