Alcatel-Lucent 7210 SAS M User Manual page 308

Show Commands
status
Syntax status
Context show>router>ldp
Description This command displays LDP status information.
Output LDP Status Output — The following table describes LDP status output fields.
Page 308
Guide
Label
Admin State
Oper State
Created at
Up Time
Last Change
Oper Down Events
Active Adjacen-
cies
Active Sessions
Active Interfaces
Inactive Inter-
faces
Active Peers
Inactive Peers
Addr FECs Sent
Addr FECs Recv
Serv FECs Sent
Serv FECs Recv
Up — The LDP is administratively enabled.
Down — The LDP is administratively disabled.
Up — The LDP is operationally enabled.
Down — The LDP is operationally disabled.
The date and time when the LDP instance was created.
The time, in hundreths of seconds, that the LDP instance has been
operationally up.
The date and time when the LDP instance was last modified.
The number of times the LDP instance has gone operationally down
since the instance was created.
The number of active adjacencies (established sessions) associated
with the LDP instance.
The number of active sessions (session in some form of creation)
associated with the LDP instance.
The number of active (operationally up) interfaces associated with the
LDP instance.
The number of inactive (operationally down) interfaces
associated with the LDP instance.
The number of active LDP peers.
The number of inactive LDP peers.
The number of labels that have been sent to the peer associated with
this FEC.
The number of labels that have been received from the peer associated
with this FEC.
The number of labels that have been sent to the peer associated with
this FEC.
The number of labels that have been received from the peer associated
with this FEC.
7210 SAS M, T, X, R6, Mxp MPLS Configuration
Description