Alcatel-Lucent 7210 SAS M User Manual page 177

interface
Syntax interface [ip-int-name | ip-address] [label-map label]
interface [ip-int-name | ip-address]
Context show>router>mpls
Description This command displays MPLS interface information.
Parameters
ip-int-name — The name of the network IP interface. An interface name cannot be in the form of an
IP address. If the string contains special characters (#, $, spaces, etc.), the entire string must be
enclosed within double quotes.
ip-address — The system or network interface IP address.
label-map label — The MPLS label on which to match.
Output MPLS Interface Output Fields — The following table describes MPLS interface output fields.
Interface
Port-id
Adm
Opr
Srlg Groups
Te-metric
Interfaces
Transmitted
Received
In Label
In I/F
Out Label
Out I/F
Next Hop
Type
A:7210SAS# show router mpls interface
===============================================================================
MPLS Interfaces
===============================================================================
7210 SAS M, T, X, R6, Mxp MPLS Configuration Guide
Values 32 — 1048575
Label
The interface name.
The port ID displayed in the slot/mda/port format.
Specifies the administrative state of the interface.
Specifies the operational state of the interface.
Specifies the shared risk link group (SRLG) name(s).
Specifies the traffic engineering metric used on the interface.
The total number of interfaces.
Displays the number of packets and octets transmitted from the inter-
face.
Displays the number of packets and octets received.
Specifies the ingress label.
Specifies the ingress interface.
Specifies the egress label.
Specifies the egress interface.
Specifies the next hop IP address for the static LSP.
Specifies whether the label value is statically or dynamically assigned.
MPLS and RSVP
Description
Page 177