Show Commands
Clear Commands
fec-egress-statistics
Syntax
fec-egress-statistics [ip-prefix/mask]
Context
clear>router>ldp
Description
This command clears LDP FEC egress statistics..
ip-prefix — Specify information for the specified IP prefix and mask length. Host bits must be 0.
mask — Specifies the 32-bit address mask used to indicate the bits of an IP address that are being
instance
Syntax
instance
Context
clear>router>ldp
Description
This command resets the LDP instance.
interface
Syntax
interface [ip-int-name]
Context
clear>router>ldp
Description
This command restarts or clears statistics for LDP interfaces.
Parameters
ip-int-name — The name of an existing interface. If the string contains special characters (#, $, spaces
peer
Syntax
peer [ip-address] [statistics]
Context
clear>router>ldp
Description
This command restarts or clears statistics for LDP targeted peers.
Parameters
ip-address — The IP address of a targeted peer.
statistics — Clears only the statistics for a targeted peer
Page 310
Guide
used for the subnet address.
Values
0 — 32
and other special characters), the entire string must be enclosed within double quotes.
7210 SAS M, T, X, R6, Mxp MPLS Configuration