Basic MPLS Configuration
Basic MPLS Configuration
This section provides information to configure MPLS and configuration examples of common
configuration tasks. To enable MPLS on 7210 SAS M, X Series routers, you must configure at
least one MPLS interface. The other MPLS configuration parameters are optional. This follow
displays an example of an MPLS configuration.
A:ALA-1>config>router>mpls# info
------------------------------------------
----------------------------------------------
A:ALA-1>config>router>mpls#
Page 82
tion Guide
admin-group "green" 15
admin-group "yellow" 20
admin-group "red" 25
interface "system"
exit
interface "StaticLabelPop"
admin-group "green"
label-map 50
pop
no shutdown
exit
exit
interface "StaticLabelPop"
label-map 35
swap 36 nexthop 10.10.10.91
no shutdown
exit
exit
path "secondary-path"
no shutdown
exit
path "to-NYC"
hop 1 10.10.10.104
no shutdown
exit
lsp "lsp-to-eastcoast"
to 10.10.10.104
from 10.10.10.103
fast-reroute one-to-one
exit
primary "to-NYC"
exit
secondary "secondary-path"
exit
no shutdown
exit
static-lsp "StaticLabelPush"
to 10.10.11.105
push 60 nexthop 10.10.11.105
no shutdown
exit
no shutdown
strict
7210 SAS M, T, X, R6, Mxp MPLS Configura-