Modifying Targeted Session Parameters - Alcatel-Lucent 7210 SAS M User Manual

LDP Configuration Management Tasks

Modifying Targeted Session Parameters

The modification of LDP targeted session parameters does not take effect until the next time the
session goes down and is re-establishes. Individual parameters cannot be deleted. The
targeted-session parameter command reverts modified values back to the default.
The following example displays the command syntax usage to revert targeted session parameters
back to the default values:
Example:
The following output displays the default values:
A:ALA-1>config>router>ldp>targeted# info detail
----------------------------------------------
----------------------------------------------
A:ALA-1>config>router>ldp>targeted#
Page 266
tion Guide
config>router# ldp
config>router>ldp# targeted-session
config>router>ldp>targeted# no authentication-key
config>router>ldp>targeted# no disable-targeted-session
config>router>ldp>targeted# no hello
config>router>ldp>targeted# no keepalive
config>router>ldp>targeted# no peer 10.10.10.99
no disable-targeted-session
hello 45 3
keepalive 40 4
7210 SAS M, T, X, R6, Mxp MPLS Configura-
form of a
no