Navigating The Drive And Programming Modes - YASKAWA CIMR-VU BA0001 Technical Manual

u

Navigating the Drive and Programming Modes

The drive is set to operate in Drive Mode when it is first powered up. Switch between display screens by using the
keys.
Frequency Reference
Power Up
Drive Mode
Output Frequency Display
Output Current Display
Output Voltage Reference
Drive Mode
YASKAWA ELECTRIC SIEP C710606 18F YASKAWA AC Drive – V1000 Technical Manual
This display screen allows the user to monitor and set the frequency reference while the
drive is running.
Note: The user can select items to display when the drive is first powered up by setting
parameter o1-02.
STOP
Default Setting
Forward/Reverse
Note: For applications that should not run in reverse (fans, pumps, etc.), set parameter
b1-04 = "1" to prohibit the motor from rotating in reverse. This sequence also puts the
STOP
drive in LOCAL mode.
Monitors the frequency output by the drive.
STOP
Monitors the output current of the drive.
STOP
Scroll through o1-01 (User Monitor Selection) until the desired contents appear.
(Default setting)
to Parameter List on page 353
STOP
Monitor Display
Monitor parameters (U parameters) are displayed.
STOP
4.3 The Drive and Programming Modes
Refer to The Drive and Programming Modes on page
: Motor rotates forward.
: Motor rotates in reverse.
Switching to reverse:
The LED is lit when
LOCAL is selected
and
84.
Refer
4
85