YASKAWA CIMR-VU BA0001 Technical Manual page 246

5.9 n: Special Adjustments
n n8-91: Id Limit for Output Voltage Limit Control
Note: Parameter available in drive software versions PRG: 1018 and later.
Sets the amount of pull-in current that flows through the motor while operating at constant speed. Set as a percentage of the
motor rated current (E5-03). Increase this setting if hunting occurs at constant speed.
No. Name Setting Range Default
n8-91 Id Limit for Output Voltage Limit Control -200 to 0% -50%
246 YASKAWA ELECTRIC SIEP C710606 18F YASKAWA AC Drive – V1000 Technical Manual