YASKAWA CIMR-VU BA0001 Technical Manual page 375

No. Name
F7-01 to EtherNet/IP and Modbus
F7-42 TCP/IP Option Parameters
<1> Parameter setting value is not reset to the default value during drive initialization, A1-03 = 1110, 2220, 3330.
<2> Setting range is determined by the drive software version.
PRG: 1016 and later: 0 to 126
PRG: 1015 and earlier: 0 to 127
<3> Parameter available in drive software versions PRG: 1011 and later.
<4> The following parameter settings apply to drive software versions 1015 and earlier:
0: Disabled
1: Enabled
<5> Parameter available in drive software versions PRG: 1012 and later.
<6> Parameter available in drive software versions PRG: 1014 and later.
<7> Parameter available in drive software versions PRG: 1023 and later.
<8> Setting range is determined by the option.
MECHATROLINK-II: 20H to 3FH
MECHATROLINK-III: 03H to EFH
<9> Available in drive software version PRG: 1024 and later.
<10> Take proper safety measures, such as installing an emergency stop switch, as the drive will continue operation when detecting an bUS error.
YASKAWA ELECTRIC SIEP C710606 18F YASKAWA AC Drive – V1000 Technical Manual
Description
F7 parameters are reserved for use with SI-EN3/V and SI-
EM3/V options. Refer to the respective Option Installation
Manuals for details.
B.2 Parameter Table
Control
Mode
Addr.
Range Def.
O
V/ P
L
f M
V
– – – – –
Pg.
Hex
– –
B
375