Configuring The Gateway Using Configuration Files From Flash; Configuring The Gateway Using Configuration Files From The Network - Avaya Advanced Gateway 2330 Manual

Basic CLI operations
The maximum length of the comment string is 80 characters.
Procedure steps
1. To enter the configuration mode, enter:
2. To add comments to the end of a configuration, enter:
Configuring the gateway using configuration files from
flash
Copy a saved .cfg file from flash to the gateway to reinstate a previously saved
configuration.
Procedure steps
1. To configure the gateway using configuration files saved in flash, enter:
2. Enter the full file name, for example .
Configuring the gateway using configuration files from the
network
Copy a .cfg file from the network to the gateway to reinstate a previously saved
configuration.
Procedure steps
1. To configure the gateway using configuration files saved in a network location,
26 Using the Command Line Interface
configure terminal
SYS_REM_ "<comments>"
configure flash
The gateway responds with the following prompt:
filename:
AG2330.cfg
enter:
configure network
The gateway responds with the following prompt:
Comments? infodev@avaya.com
August 2013