Trunk Access Groups; Virtual Port; Virtual Port Used For Virtual Extension - Panasonic DBS-576HD Technical Manual

Section 700 - Operation

Trunk Access Groups

Description
Trunks can be placed in trunk groups. When a trunk group is accessed, the System automatically
selects an open trunk from the group.
Operation
To access a trunk group:
1. Enter a trunk access code (default trunk group access codes
are 9 or 81-84).
2. Dial the phone number.
Hardware Requirements
• N/A
Related Programming
• FF1-3: MCO Access
Considerations
• Trunks can only appear in one trunk group.
• If Automatic Call Routing is enabled, the MCO access code (9 by default) automatically
accesses the Automatic Route Selection (ARS) features.

Virtual Port

Description
Virtual ports are not physical ports in the System. They are phantom or simulated ports used in the
System to support:
• Virtual extension ringing
• Virtual floating hold
Up to 96 virtual ports may be assigned per cabinet.

Virtual Port used for Virtual Extension

You can assign an actual extension number to a virtual port. You can then assign the extension
number as any actual extension (incoming call settings and types, Station Class of Service (COS),
tenant group, pickup group, etc.). You can also assign the virtual port to an FF key on one or more
telephones and set to ring. Any call directed to the virtual port extension number will ring the assigned
telephone(s).
576-50-700
Action
DBS 576 (USA) issued September 2001
Chapter 3. System Features
Result
3-59