Emergency Procedures - GE akta start Maintenance Manual

2 Safety instructions

2.3 Emergency procedures

2.3

Emergency procedures

Introduction
This section describes how to do an emergency shutdown of ÄKTA start. The section also
describes the result in the event of power failure.
Emergency shutdown
In an emergency situation:
Switch off power to the instrument by pressing the power switch to the O position or by
disconnecting the power cord from the instrument. The run is interrupted immediately.
28
WARNING
Access to power switch and power cord with plug. Do not block
access to the power switch and power cord. The power switch
must always be easy to access. The power cord with plug must
always be easy to disconnect.
ÄKTA start Maintenance Manual 29-0603-08 AC