Reset Number Of Run Hours - GE akta start Maintenance Manual

5 Service and settings
5.4 UV Monitor

5.4.4 Reset number of run hours

5.4.4 Reset number of run hours
Instructions
Follow the instructions below to reset the number of run hours of UV Monitor.
Note:
Step
1
72
NOTICE
UV Configuration of C amb and C drft values must be performed
by a GE Service Engineer. The C amb and C drft values should not
be altered by a user.
After replacing the UV Monitor, it is required to reset the number of run hours
of UV Monitor.
Action
Tap Configuration.
Result: The Configuration screen opens.
ÄKTA start Maintenance Manual 29-0603-08 AC